Shop Presses
Able to operate with up to 150,000 pounds of available pressure to be applied to any part that requires a consistent force to remove or replace.
FEATURES
10 & 25 Ton Shop Presses
20,000 lbs of pressure can be applied to push, on or off, bearings, gears, bushings or any other part that requires consistent force to remove or replace.
- A 1.5" diameter ram has a two-way mountable air/hydraulic or manual pump
- Can be either bench mounted or purchased with an integrated stand and safety gates
- Easily adjusted bolster with six positions and a wide throat
- Available bench mounted or purchased with an integrated stand
75 Ton Shop Press
The CSP-75 features full capacity side-to-side adjustment, a four way mountable air/hydraulic pump, precision control, quick exhaust, a winch cable for raising and lowering the bolster and an adjustable bolster with six positions and a wide throat.
- Adjustable bolster with six positions
- Four-way mountable pump
- Winch cable for raising and lowering the bolster
- Gray engineered and built power units
10 Ton Bench Shop Press
Model Number: CBP-10 | Part Number: 485 80055 00
Product Specifications
Capacity 20,000 lb (9,072 kg)
Cylinder Stroke 10 in (25 cm)
Weight 130 lb (59 kg)
Dimensions (W x D) 25.1 in x 7.1 in (64 cm x 18 cm)
Additional Models
485 80056 00, CBP-10A 10 Ton Commercial Bench Shop Press - Air Assist
Recommended Accessories
485 80057 00, Safety Guard
10 Ton Shop Press
Model Number: CSP-10 | Part Number: 485 80058 00
Product Specifications
Capacity 20,000 lbs (9,072 kg)
Cylinder Stroke 10 in (25.4 cm)
Weight 180 lb (81.7 kg)
Adjustment Increments 6 in (15.2 cm)
Dimensions (W x D) 25.1 in x 28 in (63.8 cm x 71.1 cm)
Additional Models
485 80059 00, CSP-10A 10 Ton Shop Press - Air Assist
Recommended Accessories
485 80061 00, Safety Guard
485 80060 00, Accessory Kit
25 Ton Shop Press
Model Number: CSP-25 | Part Number: 485 80062 00
Product Specifications
Capacity 50,000 lb (22,680 kg)
Cylinder Stroke 6.3 in (15.9 cm)
Weight 510 lb (231 kg)
Adjustment Increments 4.3 in (10.8 cm)
Dimensions (W x D) 40.5 in x 70.4 in (102.9 cm x 178.8 cm)
Additional Models
485 80063 00, CSP-25A 25 Ton Shop Press - Air Assist
Recommended Accessories
485 80065 00, Accessory Kit
485 80064 00, Safety Guard
75 Ton Shop Press
Model Number: CSP-75 | Part Number: 485 80066 00
Product Specifications
Capacity 75 Tons (68,039 kg)
Power Source Air/Hydraulic
Stroke 8.8 in (22.2 cm)
Horizontal Ram Travel 32 in (81 cm)
Throat Width 50 in (127 cm)
Inside Throat Depth 8 in (20 cm)
Outside Throat Depth 14 in (25 cm)
Required Air Pressure 120 to 200 psi (8.3 to 13.8 bar)
Adjustment Increments 6 in (15 cm)
Vertical Throat Minimum 9.5 in (24.1 cm)
Vertical Throat Maximum 39.5 in (100.3 cm)
Dimensions (H x W x D) 85 in x 78 in x 44 in (216 cm x 198 cm x 112 cm)
Additional Models
485 80067 00, CSP-75K 75 Ton Shop Press with Accessory Kit
Recommended Accessories
485 80068 00, Mountable Guard (for each side)
485 80069 00, Accessory Kit